QST-V0-G3/8-12 (186344) push-in T-fitting

Item number:

OT-FESTO015655

pcs
Also notice our alternatives
Our alternatives (similar item) This is based on our general assessment. Please check that the item is suitable for your special operating case. If in doubt, please ask us for advice.
T push in fitting R 3/8"-12mm, IQS standard (IQST 3812)
IQST 3812
T push in fitting R 3/8"-12mm, IQS standard
You will save 56%
Immediately available
You are not logged in. The availability display refers therefore to 1 pcs. Log in to have the availability of the requested quantity displayed.
Properties
size Stan­dard
Nom­i­nal width [mm] 10,0
Fire in­spec­tion, ma­te­r­ial UL94 V-0 (Hous­ing),
UL94 V-0 (sleeve)
Seal type on stud gas­ket
Con­struc­tion set up Push-​pull prin­ci­ple
Op­er­at­ing pres­sure com­plete tem­per­a­ture range [bar] -0.95 to 10
Mar­itime clas­si­fi­ca­tion see Cer­tifi­cate
Op­er­at­ing medium Com­pressed air to ISO 8573-​1:2010 [7:-:-],
Water ac­cord­ing to man­u­fac­turer de­c­la­ra­tion at www.festo.com
In­for­ma­tion about op­er­at­ing and con­trol medium Oiled op­er­a­tion pos­si­ble
Cor­ro­sion re­sis­tant class KBK 2 - mod­er­ate cor­ro­sion stress
am­bi­ent tem­per­a­ture [°C] 0 to 60
Prod­uct weight [g] 54,0
Pneu­matic con­nec­tion 1 G3/8
Pneu­matic con­nec­tion 2 For hose ex­te­rior di­am­e­ter 12 mm
Sleeve colour black
Stud ma­te­r­ial Nickel-​plated brass
Ma­te­r­ial in­for­ma­tion RoHs com­pli­ant
Hous­ing ma­te­r­ial PBT re­in­forced
Nom­i­nal tight­en­ing torque [Nm] 15,5
Tol­er­ance to nom­i­nal tight­en­ing torque ± 20 %
Further information on OT-FESTO015655
Weight 54,0 g / pcs
Customs duty number 74122000
Manufacturer Festo
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available