VZXF-L-M22C-M-B-N34-180-M1-V4# (1002548) Angle seat val.

Item number:

OT-FESTO037781

pcs
Properties
Con­struc­tion set up Pop­pet valve with pis­ton ac­tu­a­tor
Ac­tu­a­tion type pneu­matic
Seal­ing prin­ci­ple Soft
in­stal­la­tion po­si­tion ar­bi­trary
Fas­ten­ing type pipe in­stal­la­tion
Line con­nec­tion Threaded muff NPT3/4 acc. to ANSI/ASME B 1.20.1
Nom­i­nal width [mm] 18
Valve func­tion 2/2 closed mono­stable
Flow di­rec­tion Not re­versible
Medium pres­sure [bar] 0 to 20
Nom­i­nal pres­sure fit­ting 40
Ex­haust func­tion Can­not be throt­tled
Reset mode Me­chan­i­cal spring
Con­trol type Re­mote con­trolled
Pneu­matic con­nec­tion fe­male thread G1/8
Op­er­at­ing pres­sure [bar] 6 to 10
medium Hy­draulic oil on the basis of min­eral oil,
Inert gases,
min­eral oil,
Neu­tral liq­uids,
Water,
Fil­tered com­pressed air, fil­ter poros­ity 200 µm,
steam
Flow di­rec­tion Lower valve seat, for gas and liq­uid media
Op­er­at­ing medium Com­pressed air to ISO 8573-​1:2010 [7:4:4]
Max. vis­cos­ity [mm²/s] 600
Medium tem­per­a­ture [°C] -40 to 200
am­bi­ent tem­per­a­ture [°C] -10 to 60
Flow Kv [m³/h] 6,5
Ma­te­r­ial in­for­ma­tion LABS con­tain­ing ma­te­ri­als in­cluded,
RoHs com­pli­ant
In­stru­ment hous­ing ma­te­r­ial Cast stain­less steel
Ma­te­r­ial num­ber in­stru­ment hous­ing 1.4408
Spin­dle seal ma­te­r­ial PTFE
Seat seal ma­te­r­ial PTFE
Prod­uct weight [g] 1.400
Cor­ro­sion re­sis­tant class KBK 3 - se­vere cor­ro­sion stress
Ac­tu­a­tor hous­ing ma­te­r­ial High-​alloyed stain­less steels
Further information on OT-FESTO037781
Weight 1.400 g / pcs
Customs duty number 84818073
Manufacturer Festo
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
deliverable again in ⌀ 1 days